Audio - PSService.it

Professional audio systems

Services offered:

Sound system rental: tailor-made solutions for every need.
Installation and configuration: professional setup for optimal performance.
Technical support: assistance to ensure the best sound result.
Wireless and microphone systems for conferences, shows and presentations.

d&b audiotechnik

GSL8

The GSL8 is a line array module designed specifically for large-scale sound reinforcement. It is possible to suspend up to twenty-four GSL8 speakers in columns vertical columns, producing a dispersion pattern with directivity of 80° in the horizontal plane. The GSL8 houses two 14" neodymium LF drivers facing forward and two 10" side-firing neodymium LF drivers. A coaxial coaxial mid-high section contains a MF horn with one driver 10" and three HF compression drivers with 1.4" output and 3.4" voice coil mounted on a dedicated device for wave shaping. The suspension hardware of the SL series features a patented workflow with integrated tension and compression rigging mode, which allows opening angles between cabinets from 0° to 7° in 1° increments. The loudspeakers are actively driven by two channels of an appropriate d&b amplifier: one channel one channel powers the 14" LF drivers, the second channel powers all other other components, the latter subject to passive crossover passive crossover. This component geometry allows a smooth crossover design with well-defined overlaps between adjacent bands, ensuring a constant, uniform and constant, uniform and very accurate horizontal dispersion. Thanks to the arrangement of the front and side LF drivers, the directivity is maintained from 45 Hz to over 18 kHz. The cabinets are made of marine plywood and have an impact and weather-resistant PCP (Polyurea Cabinet Protection) finish. impact and weather resistant finish. The front and side panels side panels incorporate rigid metal grilles covered with an acoustically acoustically transparent and water-repellent fabric. Each side panel incorporates a recessed handle, while additional handles are provided at the rear.

d&b audiotechnik

GSL12

The GSL12 is a line array module designed specifically for large-scale sound reinforcement. It is possible to up to twenty-four GSL12 loudspeakers in columns vertical columns, producing a dispersion pattern with directivity of 120° in the horizontal plane. The GSL8 houses two 14" neodymium LF drivers facing forward and two 10" side-firing neodymium LF drivers. A coaxial coaxial mid-high section contains a MF horn with one driver 10" and three HF compression drivers with 1.4" output and 3.4" voice coil mounted on a dedicated device for wave shaping device. The opening angles between the cabinets can vary from 0° to 7° in 1° increments. The loudspeakers are actively driven by two channels of an appropriate d&b amplifier appropriate d&b amplifier: one channel powers the 14" LF drivers, the second channel powers all other components, which are passively crossover-driven. This geometry of the components allows a smooth crossover with well-defined overlaps between adjacent bands, ensuring a constant, uniform and very precise horizontal dispersion. precise. Thanks to the arrangement of front and side LF drivers side drivers, accurate directivity control is maintained directivity from 45 Hz to over 18 kHz. The cabinets are made made of marine plywood and feature a PCP finish (Polyurea Cabinet Protection) finish that is impact and weather resistant. weather-resistant PCP (Polyurea Cabinet Protection) finish. The front and side panels incorporate rigid metal grilles covered with an acoustically transparent and water-repellent fabric. transparent and water-repellent fabric. Each side panel is equipped with with a recessed handle, while additional handles are provided at the back.

d&b audiotechnik

V12

The V12 is a 3-way passive loudspeaker with two 10" LF drivers, an 8" horn-loaded MF driver and two 1.4" HF compression drivers with 2.5" coils. The symmetrical arrangement of the neodymium drivers ensures excellent frequency overlap, providing a constant dispersion of 120° down to 250 Hz. The design allows vertical arrays of up to 24 units, usable with V8 and V-SUBs. The marine plywood cabinet has an impact-resistant and waterproof PCP finish, with a protective grille, side handles and rear handles for easy transportation.

d&b audiotechnik

V8

The V8 is a passive 3-way design that houses two 10" LF drivers, an horn-loaded 8" MF driver and two 1.4" HF compression drivers 1.4" HF compression drivers with 2.5" voice coils mounted on a dedicated dedicated wave shaping device. The dipolar arrangement symmetrical arrangement of the neodymium LF drivers around the MF and HF coaxial components mounted centrally allows a uniform overlap of adjacent frequency bands in the crossover design. crossover design. This results in exceptional control of the dispersion control at constant horizontal directivity of 80°, maintained nominally up to 250 Hz. The mechanical and acoustic design allows for vertical arrays of up to twenty-four loudspeakers. It can be used in pure V8 loudspeaker columns or combined with V12 and/or with V-SUBs. The V8 cabinet is constructed from marine plywood plywood and has an impact and weather-resistant PCP (Polyurea Cabinet Protection) finish. impact and weather resistant finish. The front of the loudspeaker of the loudspeaker cabinet is protected by a rigid metal grille supported by an acoustically transparent foam. Each side panel incorporates a handle, while two additional recessed handles are provided at the bottom rear of the cabinet.

d&b audiotechnik

SLSUB & SL-GSUB

SL-SUB and SL-GSUB are cardioid subwoofers that complement the GSL and KSL systems. The rigging hardware rigging hardware of the SL-SUB allows columns of up to 14 cabinets, while the SL-GSUB is intended exclusively for ground stacked applications. Both subwoofers are Both subwoofers are equipped with a 2-way actively driven bass-reflex design housing three neodymium drivers. housing three 21-inch long-throw neodymium drivers. Two drivers are front-firing, while one radiates rear. The front and rear drivers operate in independent bass reflex chambers and are driven by separate separate amplification channels. The cardioid dispersion diagram cardioid dispersion diagram reduces unwanted energy behind the system, resulting in resulting in less reverberant field excitation for extremely accurate low-frequency reproduction. accurate. The frequency response extends from 33 to 84 Hz / 30 to 65 Hz. The SL-SUB cabinet incorporates front and rear front and rear suspension cables, while the SL-GSUB has no suspension has no suspension components and is designed to be installed on the floor. The cabinets are made of marine plywood with a plywood with a PCP (Polyurea Cabinet Protection) finish impact and weather resistant finish. The front and rear of the subwoofers are protected by rigid metal grilles covered with an acoustically transparent and water-repellent fabric. water-repellent fabric. Two rails extend from the front to the rear to protect the bottom panel. Two correspondingly shaped recesses are incorporated in the upper panel to the top panel to accommodate the guides and prevent the cabinet movement when the subwoofers are stacked. I side panels incorporate four recessed handles and four sturdy wheels are mounted on the back of the subwoofers.

d&b audiotechnik

Sub V-Series

The V-SUB is a high-performance cardioid subwoofer with active control, powered by a single channel amplifier. The V-SUB is equipped with integrated rigging equipment and shares the same acoustic and visual design of the V-GSUB, which is intended exclusively for ground stacked applications. It houses two long excursion neodymium drivers long excursion neodymium drivers, an 18" driver in a bass-reflex design front-facing and a 12" driver in a two-chamber bandpass design radiating towards the rear. rear. The cardioid dispersion pattern resulting from this approach avoids unwanted energy behind the system which reduces the reverberant field at low frequencies and provides maximum accuracy of low-frequency reproduction. frequencies.

d&b audiotechnik

B22-SUB

The B22-SUB is a high-performance subwoofer for ground stacked applications, with two 18-inch long excursion drivers in a bandpass horn design. It provides high sound pressure and extended frequency response, ideal for large sound systems. In INFRA mode, it complements other d&b subwoofers, extending the low end. Configured in cardioid array (multiples of three), it improves directivity control by reducing rear energy. The marine plywood cabinet has an impact-resistant finish, protective metal grille, side handles, rear wheels and rails for stability and protection during stacking.

d&b audiotechnik

C4-TOP

The C4-TOP is a coaxial horn loudspeaker for medium and high frequencies, with a narrow dispersion of 35° x 35° above 700 Hz, providing clarity over long distances at high SPLs. Ideal for acoustically critical environments, it has a marine plywood cabinet with impact-resistant paint, steel handles and reinforced anchorage points. The front panel includes catches for an optional lid, while the rear panel includes ratchet guide plates, two hinge plates and four sturdy wheels for easy transport.

d&b audiotechnik

C4-SUB

The C4-SUB is a powerful and punchy bandpass subwoofer designed to integrate with the C4-TOP and extend the frequency response down to 50 Hz. Its cabinet, compatible with the C3 and C4-TOP, is made of marine plywood with impact-resistant paint, steel handles and reinforced anchor points. It has fittings for an optional lid, while the back panel features ratchet guide plates, two hinge plates and four sturdy wheels for easy transportation.

d&b audiotechnik

E12 and E12-D

The E12 and E12-D are high-performance 2-way multi-purpose loudspeakers with an integrated coaxial driver. Usable as full-range systems or in sound reinforcement configurations, they can be combined with the E15X or B4 subwoofers for more power. The facetted shape allows use vertically, horizontally or as stage monitors. The E12 has an 80° x 50° dispersion, while the E12-D offers 110° x 50°, with horns rotatable by 90°. The rigid polyurethane cabinet is impact resistant and available in Special Colour (SC) and Weather Resistant (WR, IP54) versions for harsh environments.

d&b audiotechnik

E8

The E8 is a high-performance 2-way multi-purpose loudspeaker with an integrated coaxial driver. Ideal for vocal and music applications, it can be used as a full-range system or in sound reinforcement configurations. With an E12X or other E-Series subwoofer, it guarantees high performance. The facetted shape allows use vertically, horizontally or as a stage monitor. The horn has a 90° x 50° dispersion, rotatable by 90°. The rigid polyurethane cabinet is impact resistant and available in Special Colour (SC) and Weather Resistant (WR, IP54) versions.

d&b audiotechnik

Ci80

The Ci80 is a two-way coaxial bass-reflex loudspeaker with a wide 85° conical dispersion, ideal for versatile installations in a horizontal or vertical configuration. Due to its characteristics, it is perfect for near-field use, surround systems or as a delay. The cabinet, made of marine plywood with impact-resistant paint, features a rigid metal grille with acoustically transparent foam. The 30° angled rear side panels allow several units to be placed side by side to form compact arrays. It also features four M8 threaded inserts for mounting rigging accessories.

d&b audiotechnik

V7P

The V7P is a 3-way passive loudspeaker with two 10" LF drivers in dipolar configuration, an 8" MF horn-loaded driver and a 1.4" compression driver on a rotatable CD horn. It offers outstanding vocal reproduction, wide dispersion (75° x 40°, rotatable horn) and precise control down to 350 Hz. The marine plywood cabinet has an impact and weather resistant PCP finish, metal grille, handles and M10 rigging inserts. Can be used as a full-range system or in combination with other V-Series elements.

d&b audiotechnik

D80 and D40 amplifiers

The D80 and D40 are Class D amplifiers designed for d&b systems. The D80 offers four channels with signal delay capability, advanced equalisation and LoadMatch, ensuring stable performance over long distances. It includes a TFT touchscreen and supports Ethernet for remote control. The D40, also with four channels, is more compact and offers switchable filtering, equalisation and full speaker management, with advanced power management and remote access via OCA/AES70. Both support cable lengths of up to 70 metres without compromising audio quality.

d&b audiotechnik

D80 and D40 amplifiers

The D90 amplifier represents a new level of performance for four-channel Class D amplifiers, specially designed to meet the essential requirements essential requirements of touring and rental production where high flexibility in system design and production needs is essential. system design and production requirements. With key features such as maximum output voltage maximum output voltage, digital signal processing capabilities and AutoStandby and AutoWakeup functions, the D90 amplifier reduces overall system power consumption. The D90 integrates up to sixteen input channels with eight audio inputs Milan, four analogue inputs and four AES3 channels. It also includes comprehensive speaker management, switchable filter functions and definable equalisation definable equalisation. The D90 amplifier has a dynamic range of 119 dB (unweighted) and is designed to drive weighted) and is designed to drive d&b loudspeakers with high voltage loudspeakers, while providing ample protection capabilities. The amplifier's user interface consists of a 4.3" (480 x 272 px) colour touchscreen combined with a digital rotary encoder that provides device configuration and advanced status monitoring status. The D90 amplifier is equipped with a flexible Fallback flexible, which ensures the transmission of a secondary signal when needed. Remote control and full system integration are realised using d&b's simulation software ArrayCalc simulation software and the R1 remote control software.

Yamaha

RIVAGE PM Mixer

The Yamaha RIVAGE PM series is designed for creative audio engineering, aiming to capture sound transparently and accurately. Hybrid preamplifiers and VCM technology models offer natural sound and musicality. Collaboration with Rupert Neve Designs and the integration of SILK circuitry and premium plug-ins, including vintage equalisers and compressors from the 1970s and 1980s, allow for unparalleled creativity. In addition, Eventide's reverb and harmoniser effects offer a further evolution in sound quality for top-level engineers.

Professional audio systems

Services offered:

GSL8

GSL12

V12

V8

SLSUB & SL-GSUB

Sub V-Series

B22-SUB

C4-TOP

C4-SUB

E12 and E12-D

E8

Ci80

V7P

D80 and D40 amplifiers

D80 and D40 amplifiers

RIVAGE PM Mixer

Follow us on

PS Service S.r.l.

Registered office

Operational Headquarters

info@psservice.it

Warehouse hours

Information